Cat6a vs Cat8 Ethernet: do you need Cat8 for your home network?
By TechCompare · Updated · How we check
Pick Cat6a for home and office runs. It carries 10 Gbps the full 328 feet (100 m). Cat8's 25 and 40 Gbps only work over 98 feet (30 m) between gear with matching ports, so at home it adds cost, not speed.
How far each cable carries its top speed
Cat8 has the higher top speed, but only over a short run. Cat6a holds its speed for the full length copper Ethernet allows.
The Cat8 standard stops at 98 ft (30 m), so its bar does too. A full bar is 328 ft (100 m), the longest run copper Ethernet allows.
Cat6a carries 10 Gbps the full 328 feet (100 meters). Cat8 reaches 40 Gbps, but only for 98 feet (30 meters).
Cat8 is rated to 2000 MHz for 25GBASE-T and 40GBASE-T, but only over a channel of up to 98 feet (30 m) with two connectors at most. It was made for links between servers and switches in a data center. Cat6a already carries 10 Gbps over the full 328 feet (100 m), which covers the 10 GbE ports on home routers, NAS boxes and PCs. At home, Cat8 doesn't add speed. You get a shielded cable that takes more parts to install and costs more.
Try this comparison with our tools
Side-by-side specs
| Spec | Cat6a | Cat8 |
|---|---|---|
| Speed and distance | ||
| Max frequencyFrequency is the signal range the cable is tested for. A higher number leaves room for faster Ethernet. | 500 MHz | 2000 MHz (better on this spec) |
| Top speed10GBASE-T for Cat6a. 25GBASE-T and 40GBASE-T for Cat8. | 10 Gbps | 40 Gbps (better on this spec) |
| Distance at top speedCat8's channel also allows two connectors at most. | Up to 328 ft (100 m) (better on this spec) | Up to 98 ft (30 m) |
| Speed with 10 GbE portsA link runs at the speed of its ports. Cat8 only goes faster when both ends have 25GBASE-T or 40GBASE-T ports. | 10 Gbps | 10 Gbps |
| Build and install | ||
| ShieldingUTP has no shield. A shield is foil around the wire pairs that blocks interference. | UTP or shielded | Shielded only |
| PlugTIA's Cat8 and ISO's Cat8.1 use RJ45. ISO's Cat8.2 uses other plugs, like TERA or GG45. | RJ45 | RJ45 |
| Works with older Ethernet gear | Yes | Yes |
| Jacks and plugsA shielded cable's shield has to connect to shielded jacks and plugs at each end. | Plain or shielded (better on this spec) | Shielded only |
| Relative price | Lower (better on this spec) | Higher |
| Use | ||
| Made for | Homes, offices and buildings | Data center server to switch links |
How they differ
The speed comes from the ports at each end. A Cat8 cable between two 10 GbE ports runs at 10 Gbps, just like Cat6a. Cat8's extra speed only shows up when both ends have 25GBASE-T or 40GBASE-T ports, two speeds IEEE added in 2016 for data center gear.
Cat8 is also a shielded system. The shield in the cable has to connect to shielded jacks and plugs at each end, so an in-wall run takes more parts and more care than plain Cat6a. Cat6a comes both ways, unshielded (UTP) or shielded, and the unshielded kind still carries 10 Gbps the full 328 feet (100 m).
The plug doesn't change. Cat8 cables use the familiar RJ45 plug and work with Cat6a and older gear, so a Cat8 patch cable you already own is fine on a home network. It links at whatever speed your ports support. If your gear runs at 2.5 Gbps, even Cat5e covers 328 feet (100 m).
Where the numbers come from
Fluke Networks describes Cat8 as rated to 2 GHz and specified for channels of up to 98 feet (30 m) with two connectors, made for 25GBASE-T and 40GBASE-T links between servers and switches in a data center. Its Cat8 field guide explains that Cat8 is a shielded cabling system. The ISO/IEC 11801 article covers Cat8.1, which uses the RJ45 style plug and works with Cat6a, and Cat7, which is ISO's Class F at 600 MHz. The Category 6 cable article gives Cat6a's 500 MHz rating and its full 328 feet (100 m) at 10GBASE-T, and notes that Cat6e isn't a recognized standard.
Verdict
Pick Cat6a for any home or office run, and leave Cat8 to data centers.
Cat8 only goes faster when both ends have 25GBASE-T or 40GBASE-T ports, and only up to 98 feet (30 m). Without those ports, a Cat8 cable runs at the same speed as Cat6a, while Cat6a keeps that speed for the full 328 feet (100 m).
Which should you pick?
Choose Cat6a
Pick Cat6a for:
- In-wall runs in a home or office, up to 328 feet (100 m)
- 10 GbE links between a NAS, router, switch or PC
- Long runs where Cat6 only holds 10 Gbps for 180 feet (55 m)
- Installs where you'd rather use unshielded cable and plain jacks
Choose Cat8
Pick Cat8 for:
- Server to switch links in a data center, within 98 feet (30 m)
- Gear with 25GBASE-T or 40GBASE-T ports at both ends
A Cat8 patch cable works at home too, but it links at the same speed as Cat6a.