TechCompare LogoTechCompare
➜Back to Home

IPv4/IPv6 Subnet Calculator

Calculate network address, broadcast address, and usable IP ranges.

/

Results

Network Address

192.168.1.0

Broadcast Address

192.168.1.255

Usable Host Range

192.168.1.1 - 192.168.1.254

Total Usable Hosts

254

Subnet Mask

255.255.255.0

Binary Subnet Mask

11111111.11111111.11111111.00000000

Interactive Bit-Level Visualizer

Click any bit to flip it and instantly update the IP address. Network bits are indigo, host bits are pink.

About this tool

The Subnet Calculator is an essential tool for network engineers, sysadmins, and IT students. It takes any IPv4 or IPv6 address and a CIDR prefix (like /24 or /64) and instantly calculates the exact boundaries of that network segment.

Whether you are setting up a home lab, configuring AWS VPCs, or studying for the CCNA, this tool provides the exact network address, broadcast address, and usable IP range you need without having to do binary bit-shifting in your head.

How it works

The calculator converts your IP address into its raw binary representation. It then applies a bitwise AND operation using the subnet mask to find the Network Address, and a bitwise OR operation to find the Broadcast Address. The addresses between these two boundaries are your usable hosts.

IPv6 Support

IPv6 subnetting works on the exact same mathematical principles as IPv4, but uses 128-bit addresses instead of 32-bit. Because the numbers are astronomically large, this calculator uses native BigInt math to compute IPv6 network boundaries and host counts up to /128.

Frequently asked questions

What is a Subnet Mask or CIDR?
A subnet mask defines which part of an IP address represents the network and which part represents the host. CIDR (Classless Inter-Domain Routing) is a shorthand for the subnet mask. For example, a /24 CIDR means the first 24 bits of the IP address are the network, leaving the last 8 bits for hosts.
How many usable IP addresses are in a /24 subnet?
A /24 subnet provides 256 total IP addresses, but 2 are reserved: the network address (first IP) and the broadcast address (last IP). This leaves 254 usable host addresses for devices like computers, phones, and printers.
What is the difference between IPv4 and IPv6?
IPv4 uses 32-bit addresses (e.g., 192.168.1.1), providing roughly 4.3 billion unique addresses. IPv6 uses 128-bit addresses (e.g., 2001:0db8::1), providing an astronomically large number of addresses (340 undecillion) to solve the IPv4 address exhaustion problem.
What is a broadcast address?
The broadcast address is the very last IP address in an IPv4 subnet. It is used to send data to all devices on that specific network segment simultaneously. In IPv6, broadcast addresses do not exist. Instead, multicast is used.

Related tools

RAID Calculator

Calculate usable capacity and fault tolerance for RAID 0, 1, 5, 6, and 10.

Use tool ➜

Data Transfer Calculator

Estimate transfer times for files over USB, WiFi, Ethernet, and more.

Use tool ➜

Display Bandwidth Calculator

Check if your HDMI/DP cable supports your resolution and refresh rate.

Use tool ➜

JSON Formatter

Validate, format, and minify JSON data with syntax highlighting.

Use tool ➜