What speed do you need to move 100 GB in 10 minutes? 1.33 Gbps

By TechCompare · Updated November 2026 · How we check

You need about 1.33 Gbps to move 100 GB in ten minutes at peak rate. 2.5 Gigabit Ethernet is the first common listed interface with room to meet it.

A 100 GB transfer has to sustain 1.33 Gbps to finish inside ten minutes at the raw link layer. Gigabit Ethernet falls short, while 2.5 Gigabit Ethernet clears the deadline.

Required speed

1.33 Gbps

To move 100 GB

Deadline

10 minutes

Maximum transfer window

Best fit

2.5 Gigabit Ethernet

2.5 Gbps peak link rate

Find the speed needed to move 100 GB in 10 minutes. Change the scenario, deadline, or connection model.

Edit in the full tool

How this is calculated

The result comes from 100 billion bytes multiplied by eight and divided by 600 seconds. That produces 1,333.33 Mbps. The answer is a peak-rate floor, not a promise of application throughput. If the transfer uses SMB, encryption, WiFi, or a slow destination drive, choose more headroom than the exact 1.33 Gbps minimum.

Verdict

Use 2.5 GbE or a faster connection. Gigabit Ethernet needs 13 minutes 20 seconds for 100 GB at peak, so it cannot satisfy a ten-minute deadline. The 2.5 GbE interface cuts the raw time to 5 minutes 20 seconds and leaves useful room for overhead. WiFi 6 can clear the paper requirement too, but a shared wireless medium is harder to plan around than a wired link.