TechCompare LogoTechCompare

How much data can WiFi 6 transfer in 30 minutes? 2.16 TB at peak

By TechCompare · Updated · How we check

At its 9.6 Gbps peak link rate, WiFi 6 carries 2.16 TB in 30 minutes. Treat that as a ceiling because real wireless payload throughput is lower.

WiFi 6 can move 2.16 TB in 30 minutes at the 9.6 Gbps peak link rate used by this calculator. That is a raw theoretical capacity for the link, not a typical wireless file copy. Distance, channel width, client capability, airtime sharing, and interference all reduce the payload you actually see.

Data amount
2.16 TB
In 30 minutes
Link speed
9.6 Gbps
WiFi 6
Time available
30 minutes
Maximum transfer window
See how much data WiFi 6 can move in 30 minutes. Change the scenario, deadline, or connection model.
Edit in the full tool

How this is calculated

The equation multiplies 9,600 Mbps by 1,800 seconds and divides by eight. It returns 2.16 trillion bytes. The headline WiFi 6 rate is shared across clients and depends on a particular access point and client configuration. A wired 10 GbE path has a similar raw rate and is easier to keep stable for a large scheduled transfer.

Verdict

The raw answer is 2.16 TB, but WiFi 6 should not be planned like a dedicated 9.6 Gbps cable. If the usable rate averages 50% of the headline link, the same window carries about 1.08 TB. A close client with a wide channel may do well, while a crowded or distant client can fall far below that planning figure.

More Data amount scenarios

100 GB over USB 3.0
A 100 GB transfer over USB 3.0 works out to 2 minutes 40 seconds at the interface's 5 Gbps peak rate.
View details
1 TB over USB 3.0
A 1 TB transfer over USB 3.0 works out to 26 minutes 40 seconds at the interface's 5 Gbps peak data rate.
View details
4 GB over USB 2.0
A 4 GB transfer over USB 2.0 works out to 1 minute 6 seconds at the interface's 480 Mbps peak rate.
View details

Frequently asked questions

How much data can WiFi 6 move in 30 minutes?
At the 9.6 Gbps peak link rate, WiFi 6 can carry 2.16 TB in 30 minutes. Actual payload depends on the client, channel, signal, and shared airtime.
Why is my WiFi 6 transfer much lower than 9.6 Gbps?
The 9.6 Gbps number is a peak aggregate link rate. Wireless overhead, channel width, signal quality, client limits, and other devices reduce usable throughput.

Related tools

Display Bandwidth Calculator

Check display bandwidth for HDMI, DisplayPort, USB-C, Thunderbolt, and USB4.

Use tool

RAID Calculator

Calculate usable capacity and fault tolerance for RAID 0, 1, 5, 6, and 10.

Use tool

RAM Latency Calculator

Convert DDR3/DDR4/DDR5 timings (CL, tRCD, tRP, tRAS) into true latency in nanoseconds.

Use tool

Memory and Storage Throughput Visualizer

Visualize the large speed gap between CPU cache, RAM, and storage.

Use tool